Specialists in Acoustic, Access and Leisure Flooring Systems
01274 533311 . firstname.lastname@example.org
Agglomerated Cork and Recycled Rubber Underlay for Noise Reduction and Thermal Insulation of all types of flooring.
1000 x 3mm x 22m
1000 x 4mm x 17m
1000 x 5mm x 13m
1000 x 6mm x 11m
*Other sizes available upon request
(ISO 140 & 717)
∆Lw = 19dB
(Test report 8 – 210/06)
Thermal Conductivity: 0.1705 Kcal/mh˚C (ASTM C 518)
PHYSICAL AND MECHANICAL PROPERTIES
Specific weight: 500Kg/m³ (ASTM F1315)
Tensile Strength: > 0.15MPa (ASTM F152)
Compression at 0.7 MPa : 25-45% (ASTM F36)
Recovery after 0.7MPa > 75%
Durability: Lifetime of the Building
GENERAL INSTALLATION INSTRUCTIONS
The following installation instructions are recommended by Durabella Acoustics Limited, but are not intended as a definitive project specification. They are presented in an attempt to be used with recommended installation procedures of the flooring manufacturers.
Temperature >10˚C / Room moisture content < 75%
All subfloor work should be structurally sound, clear and level. The moisture content of the subfloor should not be more than 2.5% (CM) by weight measured on concrete subfloors.
Perimeter Insulation Barrier
Install a cork insulation barrier minimum 45mm wide vertically around the perimeter of the entire floor. Spot adhere it to the wall with acrylic glue or a bead of silicone sealant.
Please install loose laid of glued according to the recommended installation procedures of the final floor manufacturers.
The Perfect Corkrubber Underlay
Multi Purpose & Thermal, Impact
Easy to install
Allows nearly all types of final floor coverings
Can be used as a temporary floor covering