Specialists in Acoustic, Access and Leisure Flooring Systems
01274 533311  .  info@durabella.co.uk
PRODUCT DESCRIPTION
Agglomerated Cork Underlay for Impact Noise and Backing Protection of Carpet Floors.

PACKAGING
1m x 10m x 5mm
*Other sizes available upon request

ACOUSTICAL RESULTS
(ISO 140 & 717)
∆Lw = 33dB
(SRL C/01/5L/0191/1)

THERMAL PROPERTIES
(ISO 8301)
Thermal Conductivity: 0.042 W/m˚K
Thermal Resistance:    0.119 m²˚K/W

PHYSICAL AND MECHANICAL PROPERTIES
(ISO 7322)
Specific weight: 150-180 Kg/m³
Tensile Strength: >100 KPa
Compression: 50%
Recovery >90%
Durability: Lifetime of the Building

GENERAL INSTALLATION INSTRUCTIONS
The following installation instructions are recommended by Durabella Acoustics Limited, but are not intended as a definitive project specification. They are presented in an attempt to be used with recommended installation procedures of the flooring manufacturers.

Room Conditions
Temperature >10˚C / Room moisture content < 75%

Subfloor
All subfloor work should be structurally sound, clear and level. The moisture content of the subfloor should not be more than 2.5% (CM) by weight measured on concrete subfloors.

Installation Instructions for DuraCork C61

Loose laid Installation
The DuraCork C61 must be installed around all the perimeter walls with the joint butted tight together using single sided carpet tape. It should be loose laid up to the gripper or previous fitted under it. In this last case, the carpet gripper is nailed onto the perimeter strip. Fit the carpet using the gripper around the edge of the room to secure the carpet and give it a neat finish. Carpet grippers are ideal for use with DuraCork C61.

Bonded Installation
Fold back one half of the underlay and using a notched trowel apply acrylic glue to the subfloor ensuring a complete coverage. Unfold the DuraCork C61 onto the area with glue and repeat this method to the other half of the underlay. Trim in the DuraCork C61 tidily around the margins. Position the carpet precisely on the underlay before any adhesive is used. Unfold the carpet onto the adhesive previously applied on the DuraCork C61 surface. Repeat this method for the other half.

Final Flooring
Always follow manufacturers recommended installation instructions.
DuraCork C61
Nature’s Carpet Underlay
Low Level
Carpet  .  Natural  .  Thermal
Increases Carpet Durability
Enhances Walking Comfort
High Durability and Long Term Resilience
100% Natural and Sustainable Product