Specialists in Acoustic, Access and Leisure Flooring Systems
01274 533311 . email@example.com
The dimpled (wave textured) Agglomerated Cork Underlay for Healthy Flooring.
1m x 10m x 2.5mm
*Other sizes available upon request
(ISO 140 & 717)
∆Lw = 20dB
Thermal Conductivity: 0.038 W/m˚K
Thermal Resistance: 0.066 m²˚K/W
PHYSICAL AND MECHANICAL PROPERTIES
Specific weight: 150-200 Kg/m³
Tensile Strength: >150 KPa
Durability: Lifetime of the Building
GENERAL INSTALLATION INSTRUCTIONS:
The following installation instructions are recommended by Durabella Acoustics Limited, but are not intended as a definitive project specification. They are presented in an attempt to be used with recommended installation procedures of the flooring manufacturers.
Temperature >10˚C / Room moisture content < 75%
All subfloor work should be structurally sound, clear and level. The moisture content of the subfloor should not be more than 2.5% (CM) by weight measured on concrete subfloors.
Installation instructions for DuraCork C31PE
Unpack the DuraCork C31PE at least 24h before the installation and store it in the room where the installation will take place. Cut the C31PE to desired length and install directly over the entire floor pulled 30mm up the walls with crown of the rolled materials up (DuraCork label side down), removing all trapped air. Install by overlapping (minimum 100mm) the p.e. foil, and use an adequate tape to adhere/fix it, if necessary. After completion, the C31PE should cover the entire flooring area without gaps and with joints butted tight and preferably taped.
Always follow manufacturers recommended installation instructions.
Dimpled Underlay for Healthy Flooring
Hardwood . Floating . Natural
Saves one Installation Step
Prevents Mould Growth
High Durability and Long Term Resilience
Increases Floor Thermal Insulation